“The 1008041100 IP Vandal Resistant Substation is tough, durable and resilient, and designed for use in the harshest of environments”
for use with AlphaCom , IC-Edge & Pulse IP systems
Features
- Compatible with AlphaCom, IC-Edge, Pulse and iPBXs (SIP)
- Designed to deliver CCoIP® – Critical Communication over IP
- Vandal and water resistant
- Designed in stainless steel (A304) to withstand corrosion
- Remote software upgrade, configuration and monitoring
- Integrated data switch with advanced networking and security functions
- Relay output for remote control, e.g. doors, signal lamps and gates
- Powered from the IP network cable using Power over Ethernet (PoE)
- Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
Description
IP Vandal Resistant Substation – 1008041100 Description
The Vandal Resistant IP Intercom Substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.
IP Standards
The IP station supports open standards and is compatible with AlphaCom, IC-Edge, Pulse and iPBXs using SIP technology. When working in AlphaCom mode, the IP station supports special services only available using the CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and event scripting.
Superb Audio Quality
Like all Vingtor-Stentofon stations, this IP substation features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs.
Connections
The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The IP substation has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:
- Protection from unwanted access
- Quality of Service (QoS) by managing data traffic
- Increased system availability through redundant LAN infrastructure
- Cost efficient installation by providing shared network connections
Supervision Functions
To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.
Specification
Specification
| GENERAL | |
| Datasheet | 1008041100 IP Vandal Resistant Substation |
| Dimensions (HxWxD) | 180 x 92 x 46 mm |
| Weight | 0.8 kg |
| Protection | Vandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws |
| Protection class | With mounting box1008098000 (on wall): IP-44, With mounting box 1008098100 (flush mount): IP-55 |
| Mounting | Flush mount in 50 mm deep back box |
| Temperature | -40˚C to +55˚C |
| Relative humidity | 0% - 95% |
| Power | Power over Ethernet, IEEE 802.3 a-f, Class 0 , Local power 19 – 27 VDC, Idle 4W, max. 8W |
| Connectors | 2 x RJ45 (Ethernet) 10/100 Mbps, Pluggable screw terminals (audio and IO) |
| Remote control | 3 digital inputs, 1 relay output and one logical output |
| Max. switching capacity | 30W DC |
| Max. voltage relay | 60V DC |
| Max current relay | 1A DC |
| SIP | RFC 3261, SIP Info (DTMF), RFC 2833 (DTMF) |
| IP protocols | IP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP -DiffServ - TOS – Vingtor-Stentofon CCoIP® - SIP |
| LAN protocols | Power over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004) |
| Audio technology | Wideband 200 Hz - 7 kHz (G.722) , Telephony 3.4kHz (G.711), Active noise filtering , Acoustic echo cancellation, Open duplex, Adaptive jitter filter, 1.5 Watt audio output, 8 ohm loudspeaker impedance, External audio out (0dB, 600 ohm) |
| Management and operation | HTTPS (Web configuration), DHCP and static IP , Remote automatic software upgrade, Centralized monitoring, Status LED |
| Advanced features | Dual port managed data switch supporting VLAN and network access control |
| Compliance | CE and FCC Part 15 |
| * Not supported in STENTOFON Pulse mode | |
Intercom Product Range
IP Intercom Station Range
RingUK
RingUK
Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.
Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.
You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.
This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.
With many years of experience in the broadcast and communications industry, RingUK have built up an impressive portfolio of products and knowledge from leading manufacturers.
Distributor, Partner & Resellers For:
RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:
Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.
For more information
Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.
[ssba multisite=1]
