“The STENTOFON TCIS-1 Turbine Compact IP Standard station from the Turbine series utilize the latest technology to create unparalleled audio quality”
- Industrial IP intercom
- Audio Presence – crystal clear audio
- Amazing sound pressure levels when needed with automatic volume adjustment
- Background noise cancellation
- Dirt, dust and water resistant – rating IP-66
- Built to last with robust die-cast aluminum frame – rating IK 08
- Supports wide set of IP and networking standards
- Yellow thermoplastic front plate with one button plus M and C
- Ideal for Industrial Applications
The STENTOFON TCIS-1 Turbine Compact IP Standard station from the Turbine series utilize the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, MEMS microphone, a 10W Class D amplifier and our unique speaker grille design. These features, in conjunction with STENTOFON’s 65+ years of experience with acoustic technology are only a few of the many factors that contribute to our superior audio quality.
|Audio quality - percentage articulation loss of consonants (Alcons) - at 70 dB||< 5%*|
|Audio quality - total harmonic distortion + noise, without noise reduction (THD+N) - at 70 dB||< 2%*|
|SPL rated power at 1m in open duplex||95 dB*|
|SPL rated power at 1m in half duplex||105 dB*|
|SPL rated power at 1m in program distribution and announcement||105 dB*|
|Noise cancelling - suppression of musical noise||YES|
|Noise cancelling - suppression of static noise||YES|
|Noise cancelling - suppression of rapidly changing noise||YES|
|Codecs||G.711, G.722, G.729|
|Frequency range, G.722 Codec||200 Hz – 7000 Hz|
|Audio technology||Modes: Full open duplex, switched open duplex|
|Adaptive jitter filter|
|Custom Ringing Tone|
|Audio Mixing – Conversation and Group Call
|Sound Level Detection / scream alarm (only in AlphaCom)|
|Automatic gain control (microphone)|
|Internal speaker amplifier||10 W class D|
|Microphone technology||Digital MEMS, omnidirectional microphone|
|*Tested with Audio Precision SYS 2722 equipment|
|Ethernet connector||1 x RJ 45|
|All other connectors||Tool less, spring loaded, vibration proof terminals|
|General inputs and outputs||6 (configurable)|
|Outputs||12mA as LED drivers|
|Change-over relay (NO+NC+COM)||Max: 250VAC/220VDC, 2A, 60W|
|Power options||PoE and or external power supply|
|PoE (power over Ethernet)||IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)|
|External power supply||24 VDC (16 – 48 V)|
|Power consumption||Idle 1.8W, max 12W (depending on volume)|
|Audio line out / Induction loop signal||600 Ohm|
|Call indication||Icons/colors for hearing impaired|
|Dimensions (HxWxD)||180 x 120 x 70 mm / 7.1” x 4.7” x 2.8”|
|Dimensions after flush mount||180 x 120 x 20 mm / 7.1” x 4.7” x 0.8”|
|Dimensions with on wall box||180 x 120 x 82 mm / 7.1” x 4.7” x 3.3”|
|Weight||0.8 kg / 1.8 lbs|
|Faceplate material||3 mm / 0.12” PMMA, colour printed on back side|
|Base / frame material||3 mm / 0.12” Aluminum alloy - A413.0, AlSi12Fe, painted|
|Electronics cover material||Polycarbonate (translucent)|
|Gasket material||Silicone rubber|
|Fastening bracket material||SECC Steel|
|Button material||3 mm / 0.12” Polycarbonate (transparent)|
|Button travel length||1.25 mm|
|Button activation force||350 gf|
|Button push-cycles before failure||300 000|
|Loudspeaker poke protection, small diameter objects||Stainless steel mesh, acoustically transparent|
|Loudspeaker poke protection, large diameter object||3D cast aluminum speaker grille|
|NETWORKING AND PROTOCOLS|
|LAN protocols||Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)|
|Management and operation||HTTP/HTTPS (Web configuration) DHCP and static IP. Remote automatic software upgrade. Centralized monitoring.|
|Advanced supervision functions||E.g. network test, tone test, status reports|
|SIP Support||RFC 3261 (SIP base standard) RFC 3515 (SIP refer) RFC 2976 (SIP info), SIP using TLS, RFC 5630 SIPS URI scheme|
|DTMF Support||RFC 2833, 2976 (SIP info)|
|ENVIRONMENT AND COMPLIANCE'S|
|IP rating||IP-66, tested according to EN 60529 (applies when mounted in TA-1 back box)|
|IK rating||IK 08, tested according to EN 62262|
|Operating temperature range||-40° to 70° C|
|Storage temperature range||-40° to 70° C|
|Relative humidity||< 95% not condensing|
|Corrosion||Salty mist, tested according to EN60945|
|Vibration||Tested according to EN60945|
|EMC||CE and FCC Part 15 EN 50121-3-2 Railway application EN 50121-4 Railway application UN Regulation 10, revision 4 + Corr.1 + Amend.1|
|Compliance's||IEC/EN 60945 Marine equipment IEC/EN 61000-6 Light and heavy industry IEC/EN 50155 Railway application * IEC/EN 50486 Equipment for use in audio video door-entry systems * With additional con-formal coating Requires use of EN 50155 approved PoE switch|
|Certificates||UL 60950-1, cUL 60950-1, CB to IEC 60950-1|
|IP address information||Speaks IP address after system boot|
|Button lifetime||> 1000 000 cycles|
|Country of manufacture||Poland|
|1008140010||TA-1 Turbine Compact Onwall Box|
|1008140020||TA-2, US 2 Gang, Double Depth -3.5\", Back Box, Masonry|
|1008140050||TA-5, Bracket for US 2 Gang Back Box|
|1072160000||TURBINE ADAPTER PLATE|
|1008140180||TA-18 Turbine Compact Flush-Mount Back Box|
|1008140140||TA-14 Microphone Windscreen for TCIS/TCIV|
Pulse IP Intercom System Description
Simple to integrate and expand, the Pulse IP Intercom System is Based on STENTOFON’s IP technology, Pulse Intercom System offers High Definition voice quality, simple installation and ease of use. The IP-based system works by utilizing an existing IP network infrastructure. It employs open standards including SIP, HTTP and XML, making it simple to integrate and expand with third-party systems.
Reduce installation time and cost STENTOFON Pulse intercom system provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third-party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.
No central server is required after the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.
Simple installation and ease of use:
- Up to 64 Vingtor-Stentofon units in a single system. (The first 16 are license free)
- Up to 10 3rd Party SIP Devices (e.g. a VoIP Telephone or a SIP Software Client)
- Up to 10 dedicated Vingtor-Stentofon PC Clients
- Connect to an outside telephone line using GSM or ISDN gateways.
- No central server equipment required
- Auto discovery of IP stations
- System setup using web browser in less than 10 minute
AlphaCom XE Intercom Exchange
The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.
With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.
STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).
- Analogue or IP Stations
- Multiple Exchanges can be linked
- 4 Exchange sizes cover all requirements
- AlphaCom XE1 – Supports 552 IP Intercom Stations, Energey Saving with a Power Consumption of Max 4W
- AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
- AlphaCom XE20 – Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
- AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
- One site or Multiple sites
- Interface to CCTV, Telephone
- Audio Recording
Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.
Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.
You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.
This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.
With many years of experience in the broadcast and communications industry, RingUK have built up an impressive portfolio of products and knowledge from leading manufacturers.
RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:
Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.
For more information
- Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.
Contact us via our Intercom Enquiry Form