Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000

Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000
Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000

“The 1007063000 Analogue Tamper and Vandal Proof Intercom Station with Five buttons is designed specially for prisons and correctional facilities with safety and security for both guards and prisoners in mind”

for use with analogue AlphaCom system.

Features

  • Analogue intercom station specially designed for prison and correctional facilities
  • Advanced safety solution including scream, assault and tamper alarms
  • Vandal proof design with 2.5 mm steel front
  • Sensor buttons, microphone/speaker protection and ▪▪water resistant
  • Music distribution with volume control
  • Integrated light signaling system
  • Integrated cell light button and switch
  • Programmable I/O ports for controlling door status
  • Redundant backup for power and signaling

Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000 – Description

The analogue Tamper and Vandal Proof station type 1007063000 is designed specially for prisons and correctional facilities with safety and security for both guards and prisoners in mind. The station is much more than a traditional intercom for prison cells. The station comes with inbuilt scream alarm, assault alarm, light signaling, external controls, entertainment functions and cell light switch. The front plate is in 2,5 mm stainless steel and equipped with 5 vandal proof sensor buttons. If the prisoner in some way should manage to open the station, a tamper alarm will be triggered. If the station is disconnected, or the wires to the station are shorted, a request for action will be generated.

Call request form the cell, guard presence and alarm calls are indicated on the guard’s intercom station as well as by signal lamps outside the cell and in the guard room. The station works in a dual redundant mode. If the link to the intercom exchange fails, the lamp signaling will still work. If the lamp signaling fails, all intercom signaling will remain intact. The sensitivity of the vandal proof sensor buttons can be set to ‘normal’ or ‘high’, where the latter is intended for use by guards wearing rubber gloves.

In order to keep the sensitivity at the correct level, the stations must be installed in a dry, indoor location. For cleaning purposes, the station is protected to IP 65; fluid will not harm the station, but operation is only optimal when the surface is dry again.


Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000 – Specifications

SPECIFICATATIONS
Dimensions W x H x D128 x 264 x 51 mm, 5.0 x 10.4 x 2.4 in
Weight950 g / 2.1 lb
Finish2.5 mm brushed stainless steel
MountingFlush in back box, 6 tamper proof screws
ButtonVandal proof sensor type
Gen. purp. I/O ports3 x input – contact closure, 2 x output – 24 VDC/1 A
Lamp outputsCall – present – tamper – group
Lamp drivers24 V DC/1 A overload protected
Operating Voltage24 (11-27) V DC
Cable Requirements2 pair twisted cable, 0.5-0.6 mmØ / 24 AWG
Temperature-40ºC to +55ºC
Relative humidity0% – 95%
Loudspeaker Output1 W RMS
Frequency Range200 – 10 000 Hz
Back-box typeLBB 7073/76
ORDER NUMBERDESCRIPTIONSHIP WEIGHT
1007061000Tamper and Vandal Proof Station, one Button0.95 kg
1007060155Flush Mount Back Box with Anchors
1007060130Corridor Lamp
1007060120Remote Call Button

Tamper and Vandal Proof Intercom Station with Five buttons – 1007063000 – Similar Products

Vandal Resistant Substation
Item number: 1007056100
Vandal Resistant Substation
Item number: 1007056100
Tamper and Vandal Proof Station
Item number: 1007061000

Tamper and Vandal Resistant Intercom Station Range

Web PagePart Number:Replaced By:
IP Single Button Vandal Resistant1008041100TKIE
IP Vandal Resistant Substation TKIE1008041200
Turbine Single Button Mini IntercomIP TMIS-21008116020
IP Vandal Resistant Substation – 2 Button1008042100Discontinued
IP Vandal Resistant1008051000
Analogue Stations
Analogue Single Button Vandal Resistant1007056100
Analogue Tamper and Vandal with Five buttons1007063000Spare Parts
Analogue Tamper and Vandal with One Button1007061000Spare Parts
Analogue Mini Single Button Tamper Resistant1070601010Discontinued
Analogue Mini Two Button Tamper Resistant1070601020Discontinued
Back Boxes
On Wall Back Box for IP Vandal Resistant Substation 10080980001008098000
On Wall Station Hood for IP Vandal Resistant Substation – 1008098-H1008098-H
Flush Mount Back Box for IP Vandal Resistant Substation – 10080981001008098100
Pro700 Intercom StationsDiscontinued
Tamper Resistant Flush with One Call ButtonAB731-F
Tamper Resistant with One Call Button SurfaceAB731Discontinued

Intercom Station Range

Description
Cleanroom & Operating Theatre
Control Room
Desk or Wall
Door
Heavy Duty Telephone
Turbine
Vandal and Tamper
IP, VoIP & SIP Station Range
Video and Touch Screen
Station Accessories

For more information

If you seek professional advice on which product to select, don’t hesitate to contact RingUK’s specialists today. Our team will evaluate your requirements, research, and clarify all available options to assist you or your client in selecting the ideal system that satisfies your needs.

Contact us via our Enquiry Form.