Intercom Communications (UK) Ltd

Category Archives: IP Station

TFIX-1 EX IP Intercom Station

The TFIX-1 Explosion-proof intercom station is a rugged device, designed for harsh environments and meets industrial and offshore requirements as well as requirements for ATEX Zone 1 operation. The plastic housing is designed to withstand most chemical and environmental hazards found on- or offshore.

  • Ex IP intercom for potentially explosive atmospheres – Directive 2014/34/EU
  • Ethernet compatible 2-wire interface
  • DIP functionality for use with AlphaCom audio servers
  • SIP/VoIP functionality for use with 3rd-party systems
  • Dust- and water-protected to IP66
  • Monitoring and self-diagnostics of critical functionality
  • Visible status indicators on front panel
Description

The TFIX-1 Explosion-proof intercom station is a rugged device, designed for harsh environments and meets industrial and offshore requirements as well as requirements for ATEX Zone 1 operation. The plastic housing is designed to withstand most chemical and environmental hazards found on- or offshore.

The TFIX-1 features a full keypad with 1 programmable button and keys for manual override (PTT) and Cancel.

The intercom station is fully digital and offers crystal clear audio with high output through an internal amplifier and 78 mm speaker, delivering over 90dB SPL. Active Noise Reduction and Acoustic Echo Cancelling allows for hands-free two-way communication with superior audio quality.

Intercom status indicators display the status of the system and are compatible with AlphaCom and Exigo systems as well as SIP functionality for use with 3rd party systems.

Specification
MECHANICAL
Dimensions345 x 178 x 101 mm
Weight4 kg
MountingOn-wall box (included)
ColorBlack
ENVIRONMENTAL
Operating temperature-20°C to +60°C
Storage temperature-40°C to +70°C
Operating humidity10% to 95% RH (non-condensing)
Storage humidity10% to 95% RH (non-condensing)
Air pressure600 hPa to 1200 hPa
IP ratingIP64 in accordance with IEC 60079-0
IP66 in accordance with EN 60945
IK rating7J for enclosure
4J for cable glands
ELECTRICAL
PoENO, proprietary 2-wire data- and power bus
Power consumption4.2 W (idle) to 8 W (max)
DC power24 VDC
NETWORK
Connection2 x 2-wire
Connection typeScrew terminals
FunctionsAuto negotiating
Built-in switchN/A
CompatibilitySIP, AlphaCom™, Pulse™, G.711, G.722, G.729, HD Voice
INPUTS AND OUTPUTS
Handheld MicrophoneMicrophone (bal), PTT
HandsetMicrophone (bal), Speaker (bal) + PTT
HeadsetMicrophone (bal), Speaker (bal), + PTT
Digital inputs/outputsNO
Relay outputsNO
AudioYes, for audio accessories
Aux powerProvided by network cable
CERTIFICATIONS
ImmunityEN 60945, EN 61000-6-2
EmissionEN 60945, EN 61000-6-3, EN 61000-6-4
CENELEC safety standardsEN 60079-0: 2012, EN 60079-7: 2007, EN 60079-11: 2012,EN 60079-18: 2009
IEC safety standardsIEC 60079-0: 2011, IEC 60079-7: 2006-07, IEC 60079-11: 2011, IEC 60079-18: 2009
MarkingII 2(2) G Ex e ib mb [ib] IIC T4 Gb -20°C ≤ Ta ≤ +60°C
Accessories
Accessories
AK5850HSAK5850HSHeadset
TAX-2B1008150025Ex-Approved Plugbox & Cable for Headset with PTT
TAX-31008150030EX Handset
EMMAX-1H1023533511Handheld Industrial EX Microphone For Exigo/Turbine
FCDC21008080210Flowire Ethernet Converter - non-PoE
Powerbox PSU, 24V DC, 120W2990102120POWERBOX PSU, 24V DC, 120W
EGA-11023594100Button Protection Covers
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

Catheter Lab to Control Room Intercom

“Catheter Lab to Control room Intercom to provides Communications between the Operator in the Catheter Lab and the control room, communications is provided via a speaker mounted in the Lab ceiling and a directional microphone mounted on the Monitor stack”

A Catheter Lab to Control room Intercom Can:

  • Talk back to Control Room When Required
  • Music if required (Option)
Description

Catheter Lab to Control room Intercom Description

Catheter Lab to Control room Intercom to provides Communications between the Operator in the Catheter Lab and the control room, communications is provided via a speaker mounted in the Lab ceiling and a directional microphone mounted on the Monitor stack

Operation

Operation

To communicate with the lab, press the “Call” key , this will open the communication system in Listen only mode then press and hold the “PTT” key to talk to the lab , let go to return to listen mode

Staff in the lab cannot hear operator without the “PTT” key being pressed
When Pressing the “PTT” key the relay will cut music from Avid if fitted

Close System
To cancel all communications (Switch OFF) press “Close”

Installation

Installation

  • Control room station should be mounted for easy operator access.
  • System control box should be mounted in the control room.
  • Cable between Control room station and the control box is CAT5/6 cable
  • Power is required at the System control box
  • Cable for microphone should be screened microphone cable 31-059 CANFORD FST-LFH CABLE 1 pair Black or equivalent
  • The speaker requires 2 core speaker cable Speaker Cable 224-GY West Penn Wire  or equivalent 
Medical Departments
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

SIP Intercom Station

“The advanced SIP intercom Station standard allows you to connect varying stations from different manufacturers, thus offering a number of benefits to the user”

Features including:

  • Easy connection regardless of the type of system in use.
  • Faster response time, even as more people are connected to the system
  • A variety of types of terminals can be interconnected offering increased flexibility for users with pre-existing systems
  • Optimized infrastructure through minimizing server hardware, thus improving performance
  • Enhanced and improved user experience due to seamless integration and user tools (calling plan, number and name presentation)
Description

Description SIP Intercom Station

SIP Intercom Station (Session Initiation Protocol) is the industry standard for VoIP (Voice over IP), and has been adopted by major telecom equipment manufacturers nationwide. With the rapid advances in technology seen in recent years, there is now a wide range of SIP enabled equipment ranging from IP, DECT and Wi-Fi telephones, telephone gateways and IP PBX.

Initially introduced in 2005, the STENTOFON AlphaCom E was the first intercom system that supported SIP Intercom Systems. An industry-pioneering system, AlphaCom E & XE incorporating SIP Intercom Systems provides all the benefits of the STENTOFON system as well as the latest advancements in IP telephony, making it the most comprehensive and flexible SIP intercom system solution available to the industry.

The AlphaCom E & XE exchange can be connected directly to a SIP-enabled telephone system or alternatively via a gateway to an analog or ISDN system. With SIP, users from both the telephone network and the intercom exchange can make and transfer calls between the two systems. Finally, SIP allows IP phones to be connected directly to the AlphaCom E exchange, allowing users to set up systems to meet their custom requirements.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

VoIP Intercom Module TKIS-2

VoIP Intercom Module TKIS-2

“The STENTOFON VoIP Intercom Module TKIS-2 utilizes the latest technology to create unparalleled audio quality”

for use with AlphaCom IP  & Pulse IP systems

Highlights

  • STENTOFON Audio Presence – crystal clear audio
  • DIN-rail mountable, clips included
  • Add VoIP/CCoIP to your parking solution, cash point, vending machine, et al
  • Build your own IP Intercom station or help point
  • Make your own 10W IP Speaker
  • Control relay and I/Os over IP
  • Supports AlphaCom, Pulse and SIP (for use with any IPBX)
  • Supports a wide set of IP networking standards
  • Remote software upgrade, configuration and monitoring
  • Operating temperature range -40° to 70° C / -40° to 158 ° F
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.
Description

VoIP Intercom Module TKIS-2 Description

The STENTOFON VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier.

These features, in conjunction with STENTOFON’s 65+ years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.

Specifications
AUDIO
Noise cancelling - suppression of musical noiseYES
Noise cancelling - suppression of static noiseYES
Noise cancelling - suppression of rapidly changing noiseYES
CodecsG.711, G.722, G.729
Frequency range, G.722 Codec200 Hz – 7000 Hz
Audio technologyModes: Full open duplex, switched open duplex, Adaptive jitter filter, Local tone generator, Audio mixing - 3 channels, Sound level detection (scream alarm), Automatic gain control (microphone), Automatic volume adjustment
Internal speaker amplifier10 W class D
Supported microphone technologiesDigital MEMS, omnidirectional microphone. Electret omnidirectional microphone
Recommended loudspeaker impedance8 ohm
HARDWARE
Ethernet connector1 x RJ 45
All other connectorsTool less, spring loaded, vibration proof terminals
General inputs and outputs6 (configurable)
Outputs12mA as LED drivers
Change-over relay (NO+NC+COM)Max: 250VAC/220VDC, 2A, 60W
Power optionsPoE and or external power supply
PoE (power over Ethernet)IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
External power supply24 VDC (16 – 48 V)
Power consumptionIdle 1.8W, max 12W (depending on volume)
Audio line out / induction loop signal600 Ohm
NETWORKING AND PROTOCOLS
ProtocolsIPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, STENTOFON CCoIP® , NTP
LAN protocolsPower over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operationHTTP/HTTPS (Web configuration) DHCP and static IP + STENTOFON Pulse™. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functionsE.g. network test, tone test, status reports
SIP supportRFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF supportRFC 2833, 2976 (SIP info)
ENVIRONMENT AND COMPLIANCES
Operating temperature range-40° to 70° C / -40° to 158 ° F
Storage temperature range-40° to 70° C / -40° to 158 ° F
Relative humidity< 95% not condensing
EMCCE and FCC Part 15
CertificatesUL 60950-1, cUL 60950-1, CB to IEC 60950-1
OTHER SPECIFICATIONS
IP address informationSpeaks IP address after system boot (requires connected loudspeaker)
Country of manufacturePoland
Dimensions (HxWxD)32 x 117 x 71 mm
Weight0.1 kg / 0.2 lbs
Encapsulation materialASA plastic
DIN-rail clipsWago 209 (included)
Station Datasheet

Station Datasheet

TKIS-2 1008131020 VoIP Intercom module

RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

Office Intercom System

Office Intercom System

“Within a critical, time-pressured working environment such as offices and business, it is essential that there are excellent office Intercom system in place to find and connect people”

An office Intercom System provides communications in:

  • Reception
  • Offices
  • Meeting Rooms
  • Corridors and staff room
  • Respond to the front door from any location, and if required give access remotely.

Features:

  • “All Call” for when you are looking for someone.
  • “Group Call” as above but sent to selected areas.
  • Both of the above with “Call Back” make it easy to connect to the person who called you.
  • Easy installation via your IP network.
Description

Office Intercom System Description

An Office Intercom System provides highly efficient, speedy, easy-to-use communication systems between the different areas that are vital for the effective running of an office or business.
Simply put, it can have a direct and dramatic effect on the ability of staff to perform to the best of their ability and to make the best use of their often limited resources.

In all respects, we facilitate every aspect of communication through the office intercom system, whilst ensuring that it simplifies and supports the essential work that busy professionals need to do at all times.

An office intercom system can link between door entry and reception, thereby superbly assisting security, plus staff restrooms, meeting rooms, and a wide range of more specialist areas such as stores, factory floor, production. This polished, integrated way of managing communications saves staff expending unnecessary time and effort which they can instead devote to their valuable work and also provides staff with handy communication features that are simply not available on a standard telephone system.

Pulse

Pulse IP Intercom System Description

Simple to integrate and expand, the Pulse IP Intercom System is Based on STENTOFON’s IP technology, Pulse Intercom System offers High Definition voice quality, simple installation and ease of use. The IP-based system works by utilizing an existing IP network infrastructure. It employs open standards including SIP, HTTP and XML, making it simple to integrate and expand with third-party systems.

Reduce installation time and cost STENTOFON Pulse intercom system provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third-party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.

No central server is required after the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.

Simple installation and ease of use:

  • Up to 64 Vingtor-Stentofon units in a single system. (The first 16 are license free)
  • Up to 10 3rd Party SIP Devices (e.g. a VoIP Telephone or a SIP Software Client)
  • Up to 10 dedicated Vingtor-Stentofon PC Clients
  • Connect to an outside telephone line using GSM or ISDN gateways.
  • No central server equipment required
  • Auto discovery of IP stations
  • System setup using web browser in less than 10 minute

Links

IP & VoIP Intercom Station

Pulse-Getting-Started

AlphaCom

AlphaCom XE Intercom Exchange

The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.

With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.

STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).

Features:

  • Analogue or IP Stations
  • Multiple Exchanges can be linked
  • 4 Exchange sizes cover all requirements
    • AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE20 –  Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
  • One site or Multiple sites
  • Interface to CCTV, Telephone
  • Audio Recording
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]