Intercom Communications (UK) Ltd

IP Desk Intercom Station with Display and Handset – 1008001000

IP Desk Intercom Station with Display and Handset - 1008001000

“The 1008001000 IP Desk Intercom Station with Display and Handset is a general purpose intercom station intended for use where a desktop station is the most practical choice”

for use with AlphaCom IP , IC-Edge & Pulse IP Intercom Systems

Replaced by the NEW IP Desk Master with Handset V2 – 1008401000

Features

  • Compatible with Vingtor-Stentofon AlphaCom, IC-Edge, Vingtor-Stentofon Pulse and iPBXs (SIP)
  • Large high contrast display with backlight for excellent readability and 16 characters for location description.
  • Four dynamic navigation keys for quick access to system menus and directory entries.
  • Ten DAK keys provide single-touch access to stations, group calls, audio monitoring, public address zones, radio channels and telephone lines
  • Remote software upgrade, configuration and monitoring
  • Integrated data switch with advanced networking and security functions
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
Description

IP Desk Intercom Station with Display and Handset – 1008001000 Description

The IP Desktop Master is a general purpose intercom station intended for use where a desktop station is the most practical choice. It features a large high contrast display with backlight which allows important information about connections to be shown very clearly.

The IP station supports open standards and is compatible with Vingtor-Stentofon AlphaCom, IC-Edge, Vingtor-Stentofon Pulse and iPBXs using SIP technology. When working in AlphaCom mode, the IP station supports special services only available using the Vingtor-Stentofon CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and Vingtor-Stentofon event scripting.

Like all Vingtor-Stentofon stations, this IP desktop station features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs.

The IP station has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:

  • Protection from unwanted access
  • Quality of Service (QoS) by managing data traffic
  • Increased system availability through redundant LANinfrastructure
  • Cost efficient installation by providing shared network connections

To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.

Specification

Specification

GENERAL
Dimension (WxHxD)225 x 75 x 176 mm
Weight0.7 kg
DisplayBacklit display, 35 x 68 mm (64 x 128 pixels)
Temperature range0˚C - 55˚C
Relative humidity< 95% not condensing
Power consumptionPower over Ethernet, IEEE 802.3 a-f, Class 0 Idle 4W, max. 8W
Connectors2 x RJ45 (Ethernet) 10/100 Mbps
SIPRFC 3261, SIP Info (DTMF), RFC 2833 (DTMF)
IP protocolsIP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP - DiffServ - TOS – STENTOFON CC oIP® - SIP
LAN protocolsPower over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004)
Audio technology Wideband 200 Hz - 7 kHz (G.722) Telephony 3.4kHz (G.711) Active noise filtering Acoustic echo cancellation Active noise filtering Telephony 3.4kHz (G.711) Wideband 200 Hz - 7 kHz (G.722)
Audio output1.5 Watt, 85 dB audio pressure 1m from speaker
Management and operationHTTPS (Web configuration) DHCP and static IP Remote automatic software upgrade Centralized monotoring Status LED
Advanced featuresDual port managed data switch supporting VLAN and network access control
ComplianceCE and FCC Part 15
CertificatesUL 60950-1, cUL 60950-1, CB to IEC 60950-1
IP RatingIP-42
Black versionItem.no 1008001100
Pulse

Pulse IP Intercom System Description

Simple to integrate and expand, the Pulse IP Intercom System is Based on STENTOFON’s IP technology, Pulse Intercom System offers High Definition voice quality, simple installation and ease of use. The IP-based system works by utilizing an existing IP network infrastructure. It employs open standards including SIP, HTTP and XML, making it simple to integrate and expand with third-party systems.

Reduce installation time and cost STENTOFON Pulse intercom system provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third-party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.

No central server is required after the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.

Simple installation and ease of use:

  • Up to 64 Vingtor-Stentofon units in a single system. (The first 16 are license free)
  • Up to 10 3rd Party SIP Devices (e.g. a VoIP Telephone or a SIP Software Client)
  • Up to 10 dedicated Vingtor-Stentofon PC Clients
  • Connect to an outside telephone line using GSM or ISDN gateways.
  • No central server equipment required
  • Auto discovery of IP stations
  • System setup using web browser in less than 10 minute

Links

IP & VoIP Intercom Station

Pulse-Getting-Started

AlphaCom

AlphaCom XE Intercom Exchange

The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.

With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.

STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).

Features:

  • Analogue or IP Stations
  • Multiple Exchanges can be linked
  • 4 Exchange sizes cover all requirements
    • AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE20 –  Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
  • One site or Multiple sites
  • Interface to CCTV, Telephone
  • Audio Recording
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

IP Vandal Resistant Substation – 1008041100

“The 1008041100 IP Vandal Resistant Substation is tough, durable and resilient, and designed for use in the harshest of environments”

for use with AlphaCom , IC-Edge & Pulse IP systems

Features

  • Compatible with AlphaCom, IC-Edge, Pulse and iPBXs (SIP)
  • Designed to deliver CCoIP® – Critical Communication over IP
  • Vandal and water resistant
  • Designed in stainless steel (A304) to withstand corrosion
  • Remote software upgrade, configuration and monitoring
  • Integrated data switch with advanced networking and security functions
  • Relay output for remote control, e.g. doors, signal lamps and gates
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
Description

IP Vandal Resistant Substation – 1008041100 Description

The Vandal Resistant IP Intercom Substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.

IP Standards

The IP station supports open standards and is compatible with AlphaCom, IC-Edge, Pulse and iPBXs using SIP technology. When working in AlphaCom mode, the IP station supports special services only available using the CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and event scripting.

Superb Audio Quality

Like all Vingtor-Stentofon stations, this IP substation features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs.

Connections

The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The IP substation has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:

  • Protection from unwanted access
  • Quality of Service (QoS) by managing data traffic
  • Increased system availability through redundant LAN infrastructure
  • Cost efficient installation by providing shared network connections

Supervision Functions

To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.

Specification

Specification

GENERAL
Datasheet1008041100 IP Vandal Resistant Substation
Dimensions (HxWxD)180 x 92 x 46 mm
Weight0.8 kg
ProtectionVandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws
Protection classWith mounting box1008098000 (on wall): IP-44, With mounting box 1008098100 (flush mount): IP-55
MountingFlush mount in 50 mm deep back box
Temperature-40˚C to +55˚C
Relative humidity0% - 95%
PowerPower over Ethernet, IEEE 802.3 a-f, Class 0 , Local power 19 – 27 VDC, Idle 4W, max. 8W
Connectors2 x RJ45 (Ethernet) 10/100 Mbps, Pluggable screw terminals (audio and IO)
Remote control3 digital inputs, 1 relay output and one logical output
Max. switching capacity30W DC
Max. voltage relay60V DC
Max current relay1A DC
SIPRFC 3261, SIP Info (DTMF), RFC 2833 (DTMF)
IP protocolsIP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP -DiffServ - TOS – Vingtor-Stentofon CCoIP® - SIP
LAN protocolsPower over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004)
Audio technologyWideband 200 Hz - 7 kHz (G.722) , Telephony 3.4kHz (G.711), Active noise filtering , Acoustic echo cancellation, Open duplex, Adaptive jitter filter, 1.5 Watt audio output, 8 ohm loudspeaker impedance, External audio out (0dB, 600 ohm)
Management and operationHTTPS (Web configuration), DHCP and static IP , Remote automatic software upgrade, Centralized monitoring, Status LED
Advanced featuresDual port managed data switch supporting VLAN and network access control
ComplianceCE and FCC Part 15
* Not supported in STENTOFON Pulse mode
Sample Systems

Three IP Vandal Resistant Substations

The stations on this system normally have two extra buttons for calling locations.

  • Call Location One
  • Call Location Two
  • Cancel

By pressing and holding the call button, you can talk in “Press to Talk” mode, one way forced speech to noisy locations.


Two IP Vandal Resistant Substations to One Desk/Wall Master Station

The Stations on this system have a single call button which connects to the Desk/Wall Master Station.

The Desk/Wall station can call either wall station or can make a “ALL CALL” public address call

RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

IP Flush Master Display Station – 1008031000

IP Flush Master Display Station - 1008031000

“The 1008031000 IP Flush Master Display Station is designed for table-top mounting in bank/finance and office environments. It is also well suited as a control room intercom station”

for use with Pulse IP and AlphaCom IP  Intercom systems.

Features

  • Compatible with AlphaCom, Pulse and iPBXs (SIP)
  • Made for CCoIP® – Critical Communication over IP
  • Robust aluminium front plate
  • Large high contrast display with backlight for excellent readability
  • Four dynamic navigation keys and four DAK keys for quick access to system menus and directory entries.
  • White light behind all keys for excellent readability in dark environments
  • Optional noise cancelling goose-neck microphone
  • Optional handset unit
  • Optional IP DAK-48 Unit
  • Remote software upgrade, configuration and monitoring
  • Integrated data switch with advanced networking and security functions
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
  • Clean relay output contact for control of external equipment
Description

IP Flush Master Display Station Description

The CRM V is an IP control room intercom intended for use in control and guard rooms. The station features a large high contrast display with adjustable backlight and up to 8 lines with 20 characters. The station has four direct access keys. Each key has a red and a green LED to show status.

The IP station supports open standards and is compatible with AlphaCom, Pulse and iPBXs using SIP technology. When working in AlphaCom mode, the IP station supports special services only available using the Vingtor-Stentofon CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and VINGTOR-STENTOFON event scripting.

Like all Vingtor-Stentofon stations, this IP flush station features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs. The IP station has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:

  • Protection from unwanted access Protection from unwanted access
  • Quality of Service (QoS) by managing data traffic
  • Increased system availability through redundant LAN infrastructure
  • Cost efficient installation by providing shared network connections

To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.

Specification
GENERAL
Dimensions (WxHxD)125 x 280 x 33 mm
Weight0.63 kg
Temperature Range0ºC to + 50ºC
Relative humidity< 95% not condensing
User interfaceBacklit graphical display, 35 mm x 68 mm, 4 function keys, 4 programmable direct access keys (DAK), Green/Red status, LED per DAK, Full keypad, Call indication LED
PowerPower over Ethernet, IEEE 802.3 a-f, Class 0, Local power 19 – 27 VDC, Idle 4W, max. 8W
ConnectorsRJ45 (Ethernet) - RJ11 (Handset & Headset), Pluggable screw terminals (I/O local power)
Remote control Max. switching capacity , Max. voltage relay, Max current relay3 digital inputs, 1 relay output and one logical output, 30W DC, 60V DC, 1A DC
SIPRFC 3261, SIP Info (DTMF), RFC 2833 (DTMF)
IP protocolsIIP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP - DiffServ - TOS – STENTOFON CCoIP® - SIP
LAN protocolsPower over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004)
Audio technologyTelephony 3.4kHz (G.711) , Wideband/HD Voice (G.722), Active noise filtering, Acoustic echo cancellation, Open duplex, Volume override
Audio output1.5 Watt - 75 dB @ 1 m from speaker
Management and operationHTTPS (Web configuration), DHCP and static IP, Remote automatic software upgrade, Centralized monitoring, Status LED
Advanced featuresDual port managed data switch supporting VLAN and network access control
ComplianceCE and FCC Part 15
CertificatesUL 60950-1, cUL 60950-1, CB to IEC 60950-1
IP RatingIP-32
Pulse

Pulse IP Intercom System Description

Simple to integrate and expand, the Pulse IP Intercom System is Based on STENTOFON’s IP technology, Pulse Intercom System offers High Definition voice quality, simple installation and ease of use. The IP-based system works by utilizing an existing IP network infrastructure. It employs open standards including SIP, HTTP and XML, making it simple to integrate and expand with third-party systems.

Reduce installation time and cost STENTOFON Pulse intercom system provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third-party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.

No central server is required after the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.

Simple installation and ease of use:

  • Up to 64 Vingtor-Stentofon units in a single system. (The first 16 are license free)
  • Up to 10 3rd Party SIP Devices (e.g. a VoIP Telephone or a SIP Software Client)
  • Up to 10 dedicated Vingtor-Stentofon PC Clients
  • Connect to an outside telephone line using GSM or ISDN gateways.
  • No central server equipment required
  • Auto discovery of IP stations
  • System setup using web browser in less than 10 minute

Links

IP & VoIP Intercom Station

Pulse-Getting-Started

AlphaCom

AlphaCom XE Intercom Exchange

The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.

With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.

STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).

Features:

  • Analogue or IP Stations
  • Multiple Exchanges can be linked
  • 4 Exchange sizes cover all requirements
    • AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE20 –  Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
  • One site or Multiple sites
  • Interface to CCTV, Telephone
  • Audio Recording
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

IP Dual Display Intercom Station – 1008007000

IP Dual Display Intercom Station - 1008007000

“The 1008007000 IP Dual Display Intercom Station is designed for table-top mounting in bank/finance and office environments”

for use with AlphaCom IP & Pulse IP Intercom Systems

Features

  • IP intercom station
  • Remote software upgrade
  • Powered Via Power over Ethernet (PoE)
  • Superb audio quality
  • Displays with backlight
  • 90 Direct Access Keys (DAK) on 9 dynamic DAK pages
  • 4 dynamic navigation keys
Description

IP Dual Display Intercom Station Description

The 1008007000 IP Dual Display Intercom Station is designed for table-top mounting in bank/finance and office environments. It is also well suited as a control room intercom station. The physical size of the intercom station makes it easy to place on desks with limited space. An optional noise cancelling gooseneck microphone module can be mounted in noisy environments. The two backlit easy-to-read displays and navigation buttons provide single-touch access to intercom stations, group calls, audio monitoring, public address zones, radio channels, the opening of doors and gates as well as other functions. The direct access keys are easily programmed from the intercom and can be changed at any time. The display may be edited to show your personal text.

Specification

Specification

Size (W x H x D) in mm: 72 x 140 x 270 mm

Weight 0.4 kg

Pulse

Pulse IP Intercom System Description

Simple to integrate and expand, the Pulse IP Intercom System is Based on STENTOFON’s IP technology, Pulse Intercom System offers High Definition voice quality, simple installation and ease of use. The IP-based system works by utilizing an existing IP network infrastructure. It employs open standards including SIP, HTTP and XML, making it simple to integrate and expand with third-party systems.

Reduce installation time and cost STENTOFON Pulse intercom system provides a smart and simple interface that reduces installation time and cost. To install Pulse, one station is selected as the primary station or system master. This master station provides SIP server functions to the other stations in the system and optionally any third-party IP telephones and gateways. Depending on the number of stations in the system, basic installation can be completed in less than 10 minutes.

No central server is required after the management software is activated for the chosen master station, all that is required is configuration of directory numbers of the other stations. Since the system does not require a central server, connection of the IP stations to the network is all that is needed for system set-up.

Simple installation and ease of use:

  • Up to 64 Vingtor-Stentofon units in a single system. (The first 16 are license free)
  • Up to 10 3rd Party SIP Devices (e.g. a VoIP Telephone or a SIP Software Client)
  • Up to 10 dedicated Vingtor-Stentofon PC Clients
  • Connect to an outside telephone line using GSM or ISDN gateways.
  • No central server equipment required
  • Auto discovery of IP stations
  • System setup using web browser in less than 10 minute

Links

IP & VoIP Intercom Station

Pulse-Getting-Started

AlphaCom

AlphaCom XE Intercom Exchange

The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.

With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.

STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).

Features:

  • Analogue or IP Stations
  • Multiple Exchanges can be linked
  • 4 Exchange sizes cover all requirements
    • AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE20 –  Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
  • One site or Multiple sites
  • Interface to CCTV, Telephone
  • Audio Recording
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]

IP CRM-V DAK Module – 1008010100

IP CRM-V DAK Module - 1008010100

“The 1008010100 IP CRM-V DAK Module is an expansion of the CRM-V for applications where quick access to different functions is required”

for use with analogue AlphaCom system.

Features

  • Extends IP Flush Master Station with 48 programmable DAK keys (direct access keys)
  • Ideal for control room applications
  • Visual indications with two LEDs (green/red) per DAK key
  • All keys have backlight (adjustable)
  • Easy labeling of keys
Description

IP CRM-V DAK Module Description

The IP DAK-48 Unit extends the IP Flush Master Station with DAK buttons and visual indicators (LEDs), providing the perfect solution for the control room.

Each DAK key is equipped with two programmable LED indicators, one red and one green. The LEDs can be used to show alarms, notifications, call requests, or any other indication required from the system. This opens up for a wide range of integrations and applications such as:

  • Advanced call request handling with visual indications
  • CCTV and intercom integration
  • Dynamic group call and PA zone selection
  • Simplex (radio) conference with visual indications

The IP DAK-48 Unit is easy to install. The connection between the IP Flush Master and DAK module is completely transparent for the user. When connected, the DAK module acts as an integral part of the IP Flush Master station, giving access to a large number of direct access keys with related LED indicators.

One or two DAK modules can easily be connected to one IP Flush Master, giving a total of 52/100 DAK keys. The module is powered entirely from the IP Flush Master host, and requires no other connections. The IP Flush Master can power up to 2 DAK modules regardless of its own power source (PoE or separate 24 VDC supply).

Specification
SPECIFICATIONS
Dimension (WxHxD):125 x 280 x 30 mm
Weight0.65 kg
Temperature range0˚C to +55˚C
PowerPowered over connection cable from IP Flush Master Station
ConnectorsRJ45, one in and one out
BacklightWhite backlight
InstallationRJ45 terminated cable between IP Flush Master Station and DAK module. 2 modules can be daisy chained (included)
SoftwareAll software for the DAK module is located in the IP Flush Master Station
IP ratingIP-32
CertificatesUL 60950-1, cUL 60950-1, CB to IEC 60950-1
AlphaCom

AlphaCom XE Intercom Exchange

The AlphaCom XE Intercom Exchange is the most powerful and flexible communication platform on the market enabling your security system to act in the most effective and fastest possible way during critical situations.

With AlphaCom XE audio servers, flexibility is key. You can have just a few or thousands of users spread around different locations. Thanks to its open, modular design and scalable architecture, AlphaCom XE has the flexibility to grow with your business and adapt to your long term needs. The system can be tailored to support applications of almost unlimited specificity and complexity.

STENTOFON’s CCoIP® (Critical Communication over IP) implies the employment of Voice over IP applications required in critical situations. AlphaCom XE is designed with CCoIP incorporation which ensures the delivery of instant and secure voice and data services. The AlphaCom XE system provides carrier class system availability and protects resources in an IP environment by using embedded IP security mechanisms. The main security mechanisms used are restricted management access, separate management interface, internal firewall, integrity check (MD5), virtual LAN (IEEE 802.1Q) and network access control (IEEE 802.1X).

Features:

  • Analogue or IP Stations
  • Multiple Exchanges can be linked
  • 4 Exchange sizes cover all requirements
    • AlphaCom XE7 – Supports 552 IP intercom stations and 36 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE20 –  Supports 552 IP intercom stations and 102 analog intercom stations with SIM card based software configuration and disaster
    • AlphaCom XE26 – Supports 552 IP intercom stations and 138 analog intercom stations with SIM card based software configuration and disaster
  • One site or Multiple sites
  • Interface to CCTV, Telephone
  • Audio Recording
RingUK

RingUK

Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.

Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.

You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.

This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.

With many years of experience in the broadcast and communications industry, RingUK have built  up an impressive portfolio of products and knowledge from leading  manufacturers.

Distributor, Partner & Resellers For:

RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:

 

Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.

For more information

    Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.

Contact us via our Intercom Enquiry Form

 [ssba multisite=1]