Wall Substation with Doorbell Function or 1 Direct Dial Button – AB708
Discontinued Pro700 Intercom System
We are sorry the Pro700 Intercom System is no longer manufactured, a small range of spares are available while stocks last.
If you have a station which needs repair we can still make repairs as long as we can get the parts.
Please visit our "Intercom Products Range" page to find an alternative.
We are sorry the Pro700 Intercom System is no longer manufactured, a small range of spares are available while stocks last.
If you have a station which needs repair we can still make repairs as long as we can get the parts.
Please visit our "Intercom Products Range" page to find an alternative.
“The AB708 Wall Substation with Doorbell Function or 1 Direct Dial Button is a substation for wall mounting with one call button”
for use with the Pro700 Intercom System
Features
- Processor controlled substation with one call button
- The station has a built-in loudspeaker and microphone
- No exchange is required
- All stations are wired in parallel via a 2 pair cable
- Duplex speech
- Simplex speech can be controlled from the conversing full keypad master station
- Can be surface mounted on the wall
- Can be flush mounted through use of an easy snap-on frame BF636
- Easily programmable by internal switches
Wall Substation with Doorbell Function or 1 Direct Dial Button – AB708 Description
The AB708 Wall Substation with Doorbell Function or 1 Direct Dial Button is a substation for wall mounting with one call button. The button can easily be programmed to offer a number of different call functions.
AB708 is a substation for wall mounting with one call button. The button can easily be programmed to offer a number of different call functions. The following calling alternatives are available:
1: Door Bell
A typical function for entrance control to a building with many receiving stations inside.
A signal is audible in the receiving stations when the call button is pressed in AB708.T he call can be accepted in the receiving full keypad master stations, by pressing the “5” button. A total of 19 master stations (maximum) can receive this Door Bell call.
If the Door-Bell call is not accepted within 30 seconds or 2 minutes, the door bell call is automatically cancelled
2: Call request. (CAS, Central Answering Service)
A typical function in a surveillance system with calls to one guard position
A signal is audible in the receiving stations when the call button is pressed. The call can be accepted in the receiving full keypad master stations, by pressing the “0” button. A total of 3 master stations can receive this call request. The calling AB708 stations are queued until answered, with no time limits.
3: Direct call to numbers 13, 19, 29, 39 or 49
If nobody is available to answer the Door Bell call, the conversation can be limited to 30 seconds via switch programming. The call will, automatically disconnect, after 30 seconds
Specification
See Datasheet
Pro700 Intercom System
The Pro700 Intercom System is no longer manufactured, a small range of spares are available, if you have a station which needs repair we can still make repairs as long as we can get the parts.
The Pro700 Intercom System has been replaced by the IP Pulse and AlphaCom Systems.
RingUK
Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.
Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.
You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.
This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.
With many years of experience in the broadcast and communications industry, RingUK have built up an impressive portfolio of products and knowledge from leading manufacturers.
Distributor, Partner & Resellers For:
RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:
Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.
For more information
- Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.
Contact us via our Intercom Enquiry Form
[ssba multisite=1]