for use with AlphaCom , IC-Edge & Pulse IP systems
Features
- Compatible with AlphaCom, IC-EDGE and iPBXs (SIP)
- Designed to deliver CCoIP® – Critical Communication over IP
- Vandal and water-resistant
- Designed in stainless steel (AISI 316L) to withstand corrosion
- Remote software upgrade, configuration and monitoring
- Integrated data switch with advanced networking and security functions
- 2 Relay outputs for remote control, e.g. doors, signal lamps and gates
- Powered from the IP network cable using Power over Ethernet (PoE)
- Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
IP Vandal Resistant Substation TKIE – 1008041200 Description
The Vandal Resistant IP Intercom Substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.
The IP station supports open standards and is compatible with AlphaCom, IC-EDGE and iPBXs using SIP technology. When working in AlphaCom mode, the IP station supports special services only available using the CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and event scripting.
Like all Vingtor-Stentofon stations, this IP substation features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wideband audio codec, and high power audio outputs.
The station has two relays and 6 configurable I/Os (input, output or LED-driving). The IP substation has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:
- Protection from unwanted access
- Quality of Service (QoS) by managing data traffic
- Increased system availability through redundant LAN infrastructure
- Cost-efficient installation by providing shared network connections
To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition, the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC.
Specification
Audio | |
---|---|
Noise-cancelling - suppression of musical noise | Yes |
Noise-cancelling - suppression of static noise | Yes |
Noise-cancelling - suppression of rapidly changing noise | Yes |
Codecs | G.711, G.722, G.729 |
Frequency range, G.722 Codec | 200 Hz to 7000 Hz |
Audio technology | Modes: Full open duplex, switched open duplex |
Adaptive jitter filter | |
Local tone generator | |
Audio mixing - 3 channels | |
Sound level detection (scream alarm) | |
Automatic gain control (microphone) | |
Automatic volume adjustment | |
10 W class D | |
Electret microphone | |
8 ohm |
Hardware | |
---|---|
Ethernet connector | 2 x RJ45 |
All other connectors | Tool-less, spring-loaded, vibration proof terminals |
General inputs and outputs | 6 (configurable), 12mA as LED drivers |
Change-over relays (NO+NC+COM) | 2 relays, max: 60VDC, 2A, 60W |
Power options | PoE and or external power supply |
PoE (Power over Ethernet) | IEEE 802.3af standard, Class 0 (0.44W to 12.95 W) |
External power supply | 24 VDC (16 to 48 V) |
Power consumption | Idle 1.8W, max 13W (depending on volume) |
Audio line out / induction loop signal | 600 ohm |
Construction | |
---|---|
Dimensions (HxWxD) | 180 x 92 x 46 mm |
Weight | 0.8 kg |
Protection | Vandal-resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws |
Mounting | Flush mount in 50 mm deep back box Surface mount Surface mount with weather hood |
Frontplate material | AISI 316L |
Networking and Protocols | |
---|---|
Protocols | IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, Vingtor-Stentofon CCoIP® , NTP |
LAN protocols | Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x) |
Management and operation | HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE, Remote automatic software upgrade, Centralized monitoring |
Advanced supervision functions | E.g. network test, tone test, status reports |
SIP support | RFC 3261 (SIP base standard) |
RFC 3515 (SIP refer) | |
RFC 2976 (SIP info) | |
DTMF support | RFC 2833, 2976 (SIP info) |
Environment and Compliances | |
---|---|
Operating temperature range | -40° to 70° C / -40° to 158 ° F |
Storage temperature range | -40° to 70° C / -40° to 158 ° F |
Relative humidity | < 95% not condensing |
Ingress protection | With mounting box1008098000 (on wall): IP-44, With mounting box 1008098100 (flush mount): IP-55 |
EMC | CE and FCC Part 15 |
Three IP Vandal Resistant Substations
The stations on this system normally have two extra buttons for calling locations.
- Call Location One
- Call Location Two
- Cancel
By pressing and holding the call button, you can talk in “Press to Talk” mode, one way forced speech to noisy locations.
Two IP Vandal Resistant Substations to One Desk/Wall Master Station
The Stations on this system have a single call button which connects to the Desk/Wall Master Station.
The Desk/Wall station can call either wall station or can make a “ALL CALL” public address call
RingUK
Here at RingUK we have a considered approach to Specifying Intercom Systems, based on methodically detailing every aspect of each client’s needs. It is then and only then that we are accurately able to design an intercom system that fulfills the exact specifications of the client.
Over the years Specifying Intercom Systems this exacting approach has enabled us to develop a solid aggregate understanding of each sector whose intercom requirements we deal with. In drawing upon this we are able to quickly develop a blueprint that we then tailor to the specifics of each client’s brief. The efficacy of this procedure means we are very rarely unable to overcome unforeseen problems – if ever.
You cannot buy experience, and it’s our experience in Specifying Intercom Systems that makes us great at adapting and thinking laterally to devise the best intercom solution for our clients. This often means taking a standard intercom system and integrating it with specialized design features to create a setup that is equal in its uniqueness to the exacting needs of the client.
This is all part of an overall standard of service that we feel is unavailable elsewhere within our industry. We place a premium on total customer satisfaction, which is why we are always looking to extend and improve our product range, and to maximize value. Our position within the industry in terms of our size, reputation and our relationship with suppliers means we are able to cut costs without cutting corners.
With many years of experience in the broadcast and communications industry, RingUK have built up an impressive portfolio of products and knowledge from leading manufacturers.
Distributor, Partner & Resellers For:
RingUK specialises in assisting buyers, specifiers and end-users in the process of recommending and purchasing specialist communications equipment for various commercial applications including:
Our specialist communications advice team has over 25 years of experience, specifying and commissioning communications systems that meet the objectives of our clients. Our service centres on enabling our clients with the information necessary to make an informed decision when investing in suitable communications equipment.
For more information
- Contact intercom specialists Ring UK today for professional advice about which system you should go for. We will assess your requirements and research and explain all the options available to you to help you or your client choose a perfect Intercom system that meets your needs.
Contact us via our Intercom Enquiry Form
[ssba multisite=1]